Noticias

What are your thoughts when you think about summer?
Do you like to travel? Do you like to go to far places? Or do you prefer to stay at home or travel in your own country? Of course, there is no right or wrong answer to the questions above; summertime is about doing what you want to do, relaxing and above all: HAVING FUN!
We at PolyMX all love the sea, that is why we wrote a special message in the sand for you. 
We also would like to inform you that we are going to enjoy some time at the beach.

Because of summer holidays, we would like to inform you that PolyMX is closed from:

Monday, July 29th, 2019 up to and including 
Friday, August 9th, 2019.


We friendly advise you to place your orders latest at Thursday, the 25th of July before 10.30 AM. 

Thank you in advance and we would like to wish you a great summer!

Growth is never by mere change; it's the result of forces working together - James Cash Penney 

There is a growing demand for our products and projects are becoming bigger. It is time for us to move to a new location.
After a period of hard work, we can finally say: WE DID IT!
Our production plant and office have moved to our new building. 
We are very proud of the end result! And as much as we have enjoyed the process of renovating and seeing our new work place develop, we are also relieved that the process is over. 
The new building gives us 8,000m2 of space (three times as much as the current building has). 
The production line will be complimented with an additional ABB robot in combination with the introduction of various automation innovations. 

Our move to the new location doesn't change anything for you. The quality of our products remain the same as well as our service and accessibility. 

As of June 1st, 2019, our new address will be:
PolyMX BV
Sterrekroos 17
4941 VZ  RAAMSDONKSVEER 
The Netherlands

Tel: +31 (0) 162-748060
Email: Esta dirección de correo electrónico está siendo protegida contra los robots de spam. Necesita tener JavaScript habilitado para poder verlo.

 

Dennis Ruymaekers, a friend of Melissa Monster – van Golverdingen, is going to participate in Alpe D’HuZes.

Alpe d'HuZes is a unique sporting event where as much money as possible is raised for cancer research and for improving the quality of life of people with cancer. On a single day, 5000 participants will bike, hike or run the Alpe d'Huez. Attempting a maximum of six climbs, under the motto 'giving up is not an option'. The race day is always on the first Thursday in June and is part of a complete week, which is being prepared for a full year.  A special week full of solidarity, in which cancer is openly discussed for everyone. In 2019, the 21 turns of the Alpe d'Huez will be climbed for the fourteenth time.

Dennis is participating in Alpe D’HuZes with three people on his mind. Cees van Golverdingen, Melissa’s father and our Director is one of them.
We are honored that Dennis is doing this for Mr van Golverdingen and are very proud of Dennis.
Dennis has got a personal page, please click here to donate of follow Dennis.
Please click here if you want to know more about Alpe D'HuZes.

On behalf of the PolyMX team: Good luck Dennis!!

     

Andrew Powell and attendees at DS Smith Grenaa.

Technical training high performance rotary cutting dies at DS Smith Grenaa

Andrew Powell, Technical Sales Manager of PolyMX,  had the privilege of giving a training at the DS Smith site Grenaa. The goal of this training was to give the attendees detailed information about Rotary Diecutting. The training gave insight on how Rotary dies are made and what pitfalls you can come across.

The following topics were addressed:

  • Structural Design (and it’s limitations)
  • Manufacturing of a Rotary Die
  • Choice of materials such as shells and rotary rules
  • SRP & RRP Perforation Rules
  • Ejection Materials

Andrew and the attendees also took a look at the effects of poor maintenance. To achieve great results on a rotary diecutter the machine has to be in perfect working order. If not, this has influence on the lifespan of the machine and it’s auxillary components. What people forget is that maintenance also has a great influence on the dimensional stability of a product.

Rotary seminar 2019

Andrew Powell and attendees at DS Smith Grenaa. 

 

POLYMX TO ATTEND IADD ODYSSEY EXPO, ATLANTA, GEORGIA, USA ( 1 – 3 MAY, 2019)                                                   odyssey logo web

PolyMX will be represent at IADD Odyssey Expo in Atlanta, Georgia, USA.
The event is part tradeshow and part educational and is the only event in 2019 targeted specifically to diecutting, diemaking, foil stamping, embossing and bindery.
PolyMX will showcase its full product range and also its newest innovation for recycled cardboard: shore A10.

VISIT BOOTH 209
At the PolyMX booth you will meet Melissa Monster (Managing Director of PolyMX) and Andrew Powell (Technical Sales Manager).
Melissa and Andrew will be glad to inform you about the possibilities and solutions that PolyMX and Polytop MX® can offer you concerning  high performance die-cutting dies.


CLASSROOM SESSION – TECHNICAL PRESENTATION

In addition to the booth, Andrew Powell will be one of the speakers in the educational classroom sessions. 
During this 45 minutes technical presentation, Andrew will speak about how new materials enable you, as a packaging specialist or high performance diemaker and also to offer solutions that lead to a higher production speed with less pressure and better end products.

Bad cutting edges, cracks, rubber that need to be replaced over-and-over again-these long-time frustrations become a thing of the past when you choose the correct ejection material.

 

THE HIGHLIGHTS AT A GLANCE

The Polytop MX® range consists of solutions for folding carton, flatbed dies and rotary dies. 
Click here to view our Polytop MX® range. 

 

 

 

Cees van Golverdingen

18-12-1959           09-02-2019

 

We are deeply saddened by the loss of Cees van Golverdingen.

With great sorrow we must take leave of my husband, our father (in-law) and grandfather. Cees was founder and director of PolyMX, a pioneer in our industry, and a source of inspiration for many. Since PolyMX was founded in 2000, at the time under the name Euromat 2000, Cees put his heart and soul into the business, with considerable success. His entrepreneurial spirit helped build a fabulous business with a great team of people manufacturing high-quality products.

Merry Christmas PolyMX

2018 is coming to an end. 
Time to think over the past year, which has gone by so fast. 
We want to thank our partners and end users for the ungoing faith and trust in our company and team!

Because of Christmas Holidays, PolyMX is closed from Monday, December 24, 2018 up to and including Wednesday January 2, 2019.
Even though we'll enjoy our holidays, we are ready to start the new year full enthusiasm!

We want to wish all our employees, customers, relations and suppliers a Merry Christmas and above all a healthy 2019! 

ANDREW POWELL STRENGTHENS POLYMX AS INTERNATIONAL SALES MANAGER

The success of PolyMX is based on the unmatched quality of our products, combined with the knowledge and skills of our team. With great pride we would like to announce the arrival of Andrew Powell. He is an expert in high performance cutting dies and will strengthen our team as International Sales Manager. In this role he will be responsible for our existing partners and for the growth of our global customer portfolio.

Andrew has known PolyMX since the first introduction of Polytop MX® into the market. He knows like no other what PolyMX stands for, and he may already be known to some of you. After finishing his education he started running converting machines at Smurfit Kappa. Therefore he knows what challenges there are in the workplace. Starting as an apprentice he worked himself up to become a Senior Operator, ultimately leaving to work for the cutting die manufacturer DieVision. Here he grew from being a Technical Specialist to a Product Manager because of his ability to apply his technical knowledge, to the challenges customers bestowed upon him. As from now he supports the PolyMX team in future growth and service to existing customers and end users of high performance dies.

“PolyMX is an amazing and beautiful company. You cannot but notice the passion and service for this product and combined with the togetherness within the company, this made me feel at home immediately. It is a very pleasant work environment and I am looking forward to developing even better products and services together with our team and customers”, says Andrew Powell.

Melissa Monster-van Golverdingen, Managing Director of PolyMX: “I have known Andrew for quite some time and I am impressed by his knowledge and his work ethic. Andrew is very customer driven and will apply 100% to get things done for customers. This fits within our corporate culture. Andrew can relate to customers needs and will go to work on finding a solution to their problem. We often receive requests if we can help improve the efficiency of the die cut process and the quality of the die cut product. This exceeds just providing a good rubber advice. Th rough his knowledge of production on die presses and the manufacturing of high performance cutting dies, Andrew is the perfect person to answer these questions. He does not only know the driving forces of Polytop MX®, but also that of cutting dies. We believe in this approach and we are obliged to provide support services to our partners concerning this matter.

The forth coming period Andrew will focus on visiting our existing partners. Furthermore Andrew is per direct available for technical advice on-site or per e-mail. Andrew can be reached through his e-mail address: Esta dirección de correo electrónico está siendo protegida contra los robots de spam. Necesita tener JavaScript habilitado para poder verlo. or by telephone (0031)416-353498.

Andrew Powell1